24 CORES optical distribution box , splice box fiber optic with
Wall mount / Pole mount
The equipment is used as a termination point for the feeder cable
to connect with drop cable in FTTX communication network system.
The fiber splicing, splitting, distribution can be done in this
box, and meanwhile it provides solid protection and management for
the FTTX network building.
- Total enclosed structure.
- Material: PC+ABS,wet-proof,water-proof,dust-proof,anti-aging,
protection level up to IP65.
- Clamping for feeder cable and drop cable, fiber splicing, fixation,
storage, distribution...etc all in one.
- Cable,pigtails,patch cords are running through own path without
disturbing each other, cassette type SC adaptor installation, easy
- Distribution panel can be flipped up, feeder cable can be placed in
a cup-joint way, easy for maintenance and installation.
- Cabinet can be installed by the way of wall-mounted or
poled-mounted, suitable for both indoor and outdoor uses.
- idely used in FTTH access network.
- Telecommunication Networks
- CATV Networks
- Data communications Networks
- Local Area Networks
1, Environmental requirement
2, Main technical datasheet
UPC return loss:≥50dB
APC return loss:≥60dB
Life of insertion and extraction:＞1000 times
3, Thunder-proof technical datasheet
The grounding device is isolated with the cabinet, isolation
resistance is less than2MΩ/500V(DC)；
The withstand voltage between grounding device and cabinet is no
less than 3000V(DC)/min, no puncture,no flashover
4, Configuration table:
Table 1 Model and configuration
|Model||Description||Size(Pic 1)||Max Capacity||Installation Size(Pic 2)|
5,Product cable ways:
Drill 4 holes over the wall based on the size in table 1,place the
expansion bolt Φ7.5*40,place the box to match up the holes and use
bolt to fasten.(Pic 6)
Fix 1 set of the easy pole ring to the telecom pole .(Pic 7)
Wall mounted installation Pole mounted installation
1. Users' Manual*1.
3. Accessories Bag * 1
4. Easy pole ring*2,M6*20mm Bolt*2(Option)